Cookie preferences
Shuttle LTE adapter kit WWN03 for DS10U series
Shuttle LTE adapter kit WWN03 for DS10U series
WWN03
Expansion kit for the DS10U series to install a LTE/4G card
The Shuttle XPC accessory WWN03 allows the Shuttle XPC slim Barebone DS10U series to be upgraded with an LTE/4G function for mobile network. The LTE card will occupy the 2.5" bay, so you have to use an M.2 SSD as mass storage device. The required LTE/4G card in M.2-3042 format and an activated Nano SIM card is not included in the scope of delivery. The existing WLAN function of DS10U can still be used then.
Daughterboard LN006 with USB cable
Fastening screw for M.2/LTE card (two-parts: bolt with screw)
3x screw to install LN006 in a 2.5" bay
2x LTE/4G antennas
2x antenna cables with toothed lock washer and screw nut
Quick installation guide
Data sheet
- Compatibility
- The WWN03 can be used for
1) Shuttle XPC slim DS10Ux/DS20Ux series - the existing WLAN function can still be used then.
2) Shuttle XPC slim DH32U, DH32U5, DH410, DH410S, DH470, DH610, DH610S, DH670, XH510G2, XH610, XH610V, DL20N, DL20N6, DL20NV2, DL20N6V2 - the WLAN accessory WLN-M can not be installed at the same time.
Note that two more components are required for operation:
- LTE/4G module M.2-3042 Key B
- SIM card in Nano format
Successfully tested LTE/4G modules with USB interface:
- Sierra EM7455 (CAT 6, for Europa and North America)
- Sierra EM7430 (CAT 6, for APAC)
- Huawei ME906S (CAT 4, for EMEA, Australia, New Zealand)
- Quectel EM06-E (CAT 6, for EMEA, Australia, Brazil)
WWN03 is not compatible to LTE cards with PCIe interface e.g.:
- Fibocom L850-GL-00 LTE module
- Contents
- - Daughterboard LN006 with USB cable
- Fastening screw for M.2/LTE card (two-parts: bolt with screw)
- 3x screw to install LN006 in a 2.5" bay
- 2x LTE/4G antennas
- 2x antenna cables with toothed lock washer and screw nut
- Quick installation guide
- Two external antennas
- LTE/4G dipole omnidirectional antenna
Multi-band: supports EU frequency bands (800, 1800, 2600 MHz) for GSM/UMTS/LTE and the following frequency ranges: 704~960, 1428~1575, 1720~2170, 2400~2690 MHz
Colour: black
Length overall: 135.7 mm
Dimensions of the antenna body: 114.8 mm x 20.1 mm
Impedance: 50 Ohm
Voltage Standing Wave Ratio (VSWR): <= 3.0
Radiation: Omni
Gain: 2 dBi
Polarisation: vertical
Connector: SMA
- Two antenna cables
- RF cable lengths: 20 cm
Connectors:
1) SMA Pigtail female
2) I-PEX MHF 4
- Adapter card
- - USB connector to connect to the mainboard
- M.2 socket supports one LTE/4G module M.2-3042 Key B
- supports one SIM card in Nano format
Español