Características técnicas
Especificaciones sujetas a cambio por parte del fabricante.
| Fanless and silent | Passive cooling system, no fan noise at all Perfect to be used in noise-sensitive environments Fanless, dust-free and thus virtually maintenance-free |
| 24/7 nonstop operation | This device is approved for 24/7 permanent operation. Requirements: - Free circulation of air amongst the PC must be guaranteed. - Ventilation holes must be kept clear. - If a hard disk is installed, this must also be approved for permanent operation by its manufacturer. |
| IP54 protected | The front panel is dust-protected and protected from splashing of water according to protection class IP54. |
| Chassis | Colour: black Dimensions: - without cable collector box: 29.9 x 20.3 x 5.0 cm (W x H x D) - with cable collector box: 29.9 x 27.1 x 5.0 cm (W x H x D) 100 mm VESA mount capable Mounting hole for Kensington lock Weight: 2.47 kg net, 3.39 kg gross |
| 29.5 cm display (11.6 | 29.5 cm / 11.6" LCD TN display Aspect ratio: 16:9 widescreen Resolution: 1366 x 768 = 1.05 Megapixel Backlight unit: LED, Luminance: 250 cd/sqm (typ.) Glass thickness: 3.2 mm, Anti-Glare |
| Touchscreen | Touchscreen function supports fingertip input Capacitive Touch Panel with 10-point multi-touch Supports input with gloves (PVC, cotton, cotton/linen) Stylus pen not supported |
| Operating system | This system comes without operating system. It is compatible with: - Windows 10 (64-bit) - Linux (64-bit, does not support the NFC accessory) |
| Processor | Model: Intel Celeron 3865U (ULV) System-on-a-chip architecture (SoC): no chipset required BGA1356 package - directly soldered onto the mainboard Code name: Kaby Lake-U (7th Generation Intel Core) Cores / Threads: 2 / 2 Clock rate: 1.8 GHz L1/L2/L3 Cache: 128 kB / 512 kB / 2048 kB Memory controller: DDR4-2133 Dual Channel (1.2 V) TDP wattage: 15 W maximum Manufacturing process: 14 nm Maximum Tjunction Temperature: 100 °C Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2 Integrated graphics engine |
| Integrated Graphics | Intel HD Graphics 610 GPU clock frequency: 300~900 MHz Execution Units (EUs): 12 Supports DirectX 12 Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding Supports Quick Sync Video and Clear Video HD technology |
| Up to three displays simultaneously | Two video ports support two additional independent screens: 1) HDMI 1.4 supports 1920 x 1080 @ 60 Hz or 3840 x 2160 @ 30 Hz 2) VGA / D-Sub analog video supports 1920 x 1080 @ 60 Hz Special conditions for operation in Multi-Monitoring mode: 1) Clone mode: all displays show the same content at 1366 x 768 resolution 2) Extended mode: all displays show different content |
| BIOS | AMI BIOS in 8 MByte EEPROM with SPI interface Supports Power fail resume / always on Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states Supports hardware monitoring and watch dog functionality Supports Firmware TPM v2.0 functionality |
| Memory | 2x SO-DIMM slot with 260 pins Supports DDR4-2133 (PC4-17000) SDRAM at 1.2 V Supports Dual Channel mode Supports a maximum of 16 GB per DIMM, maximum total size: 32 GB Supports two unbuffered DIMM modules (no ECC or registered) |
| Hard disk drive / SSD | Supports one SATA hard disk or one SATA SSD drive in 6.35 cm / 2.5" format The SATA 3.0 interface supports up to 600 MB/s data transfer speed (6 Gbit/s) Supports one drive with up to 9.5 mm in height |
| M.2-2280 Slot | The M.2 2280 BM slot provides the following interfaces: - PCI-Express Gen. 3.0 X4 with up to 32 Gbps Data Transfer Speed - SATA v3.0 (max. 6 Gbps) It supports M.2 cards with a width of 22 mm and a length of 42, 60 or 80 mm (type 2242, 2260, 2280). Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key) |
| Card Reader | Integrated card reader supports SD, SDHC and SDXC memory flash cards |
| Webcam | Integrated 720p HD webcam with 1.0M CMOS sensor Resolution: max. 1280 x 720 pixels |
| Microphone and speakers | Front panel with integrated Electret Condenser Microphone (front position) and one 2 W speaker (upper side) |
| Integrated Audio | Realtek ALC269 Audio Codec Two analog audio connectors (3.5 mm) on the bottom side: 1) Line-out (headphones) 2) Microphone input Digital Audio is supported via HDMI |
| Wired Network | Intel i211 Ethernet Controller with MAC, PHY and PCIe interface Supports 10 / 100 / 1.000 MBit/s operation Supports WAKE ON LAN (WOL) from S3, S4 modes Supports network boot by Preboot eXecution Environment (PXE) |
| Wireless Network (WLAN) | Chipset: Realtek® RTL8723BE-CG M.2-2230AE Combo Module: AzureWave AW-NB165NF Two internal antennas support WLAN Transmit/Receive (1T1R) and Bluetooth Supports Wireless LAN IEEE 802.11b/g/n at 2,4 GHz Max. PHY data rate: 150 Mbps in 802.11n mode Supports Bluetooth 4.1 |
| Front LEDs | Power LED (blue) Hard disk LED (orange) |
| Connectors left side | Power button 2x USB 2.0 (type A) SD card reader Hole with Clear CMOS button Mounting hole for Kensington lock |
| Connectors right side | Optional: 2x COM port (RS232) |
| Connectors bottom side | HDMI 1.4 (supports digital video and digital audio) VGA connector (D-Sub 15 pol., analog video) 2x USB 3.0 (type A) 2x USB 2.0 (type A) Gigabit Network (LAN, RJ45) Audio Line-out / headphones (3.5 mm jack) Microphone input (3.5 mm jack) DC input for external power adapter (5.5 / 2.5 mm) 2x COM port (RS232) |
| Connectors onboard | Internal USB 2.0 type A connector for an USB cable Always power-on jumper JP7 Serial ATA (data and power) 3x USB 2.0 header (all occupied) eDP connector (Embedded DisplayPort) - occupied by the display LPC connector (occupied) I2C connector for optional NFC accessory |
| Power adapter | External 65 W power adapter (fanless) Input: 100~240 V AC, 50/60 Hz, max. 1.6 A Output: 19 V DC, max. 3.42 A, max. 65 W |
| DC Input connector | DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter) The DC-input of the computer supports an external power source with either 12V±5% and 19V±5% |
| Included Accessories: | Quick Installation Guide Windows 10 Driver DVD External Power Adapter (65W / 19V) with DC cable (approx. 1.7 m) Power cord with Euro plug (approx. 1.75 m) 4x screw M3 x 3 mm to mount the 2.5" drive into the rack 4x screw M2.5 x 4 mm to mount the rack into the chassis EMI shielding gasket (sponge) for 2.5" drive (ca. 8.5 x 10 x 30 mm) |
| Optional Accessories: | 1) COM port adapter PCP21 provides two more serial COM ports on the right side 2) NFC module PNFC01 (no Linux and transaction support) |
| Environmental Criteria | Operating temperature: 0~40 °C Humidity: 10~90 % |
| Certification and Compliance | EMI: CE, FCC, FAC, BSMI, RCM, VCCI & TELEC, RED Safety: CB, EAC & FSS, BSMI, ETL Other compliances: RoHS, ErP Lot 3, Energy Star v6.0 (Level 6) |
| Conformity | This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives: (1) 2004/108/EC relating to electromagnetic compatibility (EMC), (2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD), (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP), (4) 1999/5/EC relating to Radio and Telecommunications Terminal Equipment (R&TTE) |
