SHUTTLE XPC DL10J
 SHUTTLE XPC DL10J  
Compra Ya
x

Características técnicas

Especificaciones sujetas a cambio por parte del fabricante.
Fanless and silentCompletely fanless, virtualy noiseless
Passive cooling through convective heat transfer
Perfect to be used in noise-sensitive environments
Fanless means less dust and thus virtually no maintenance required
Low Power ConsumptionPower consumption in idle mode: 4.6 W
Power consumption under full load: 11.3 W / 17.6 W (CPU / CPU+graphics)
(measured with 2x 4 GB DDR4-2400 SO-DIMMs and 120 GB 2.5" SSD under Windows 10 64-bit)
ChassisSlim PC with black chassis made of steel
Dimensions: 190 x 165 x 43 mm (LWH) = 1.35-litre
Weight: 1.3 kg net and 2.1 kg gross
Two holes for Kensington Lock and numerous
threaded holes (M3) at both sides of the chassis
Operation Position1) Horizontal
2) Vertical with mounted feet.
These feet can be purchased as optional accessory PS02.
3) Vertical (e.g. VESA-mounted behind an appropriate monitor)
In vertical position, the front USB ports should points upward.
Ventilation holes must not be blocked to ensure sufficient cooling.
Operation SystemThis system comes without operating system.
It is compatible with
- Windows 10 (64-bit)
- Linux (64-bit)
Note: Windows 7, 8 and 8.1 are not supported
ProcessorIntel® Celeron® Processor J4005, Dual Core
CPU clock frequency: 2.0 GHz, max. Turbo frequency: 2.7 GHz
Code name: Gemini Lake, Goldmont Plus microarchitecture
14 nm structure, FCBGA1090 package (soldered)
CPU cores / Threads: 2 / 2
L2 Cache: 4 MB
Thermal Design Power (TDP): 10 W
Supports x86-64, AES-NI, VT-x (EPT), VT-d
System-on-Chip processor (SoC) with integrated graphics processor, no chipset required
Integrated GraphicsThe Graphics Processing Unit (GPU) is integrated in the processor
Intel® UHD Graphics 600 (9th Gen), graphics frequency: 250~700 MHz
Supports DirectX 12, OpenGL 4.3, OpenCL 1.2, OpenGL ES 3.0, Intel Quick Sync Video, Intel Clear Video (HD)
Execution Units (EU): 12
Triple Display Support via three video outputs:
- HDMI 1.4b: max. 4096 x 2160 @ 30 Hz or 1920 x 1200 @ 60 Hz
- DisplayPort 1.2: max. 4096 x 2160 @ 60 Hz
- D-Sub/VGA: max. 1920 x 1200 resolution @ 60 Hz
Supports two digital displays and one analog display simultaneously.
The D-Sub/VGA connector does not support the Hot Plug feature.
UEFI Firmware16 MB Flash ROM with AMIs Aptio UEFI BIOS Firmware
Based on the Unified Extensible Firmware Interface (UEFI) [1]
Supports Power fail resume / AC power on state / always on / always off [3]
Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
Supports boot up from external flash memory cards
With embedded Firmware TPM v2.0 (fTPM)
Memory2x SO-DIMM slots with 260 pins
Supports DDR4-2400 (PC4-19200U) SDRAM at 1.2V
Supports Dual Channel mode
Supports max. 8 GB per DIMM
Maximum total size: 8 GB (either 1x 8 GB or 2x 4 GB)
Supports two unbuffered DIMM modules (no ECC)
2.5 Bay for Hard disk drive/SSDSupports one drive in 6.35 cm / 2.5" format (hard disk or SSD)
Serial ATA III Interface with up to 600 MB/s transfer speed
Max. height 12.5 mm
Pre-installed SATA cable (data / power)
Supports Unified Extensible Firmware Interface (UEFI)
M.2 expansion slot for SSD cardM.2 2280 BM slot
Interfaces: PCI-Express Gen. 2.0 X4 (max. 16 Gbit/s) and SATA v3.0 (max. 6 Gbit/s)
Supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280)
Supports SATA SSDs (BM-Key) or NVMe PCIe SSDs (M-Key)
Integrated AudioRealtek ALC269 Audio Codec
Two analog audio connectors (3.5 mm):
1) Line out (head-phones)
2) Microphone input
Onboard connector for 2x 2 Watt speakers
Digital multi-channel audio output: via HDMI and DisplayPort
Card ReaderIntegrated card reader
supports standard SD, SDHC and SDXC memory flash cards
Supports boot from SD card
Controller: Realtek RTS5170 Media Processor
Wired NetworkRJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/s.
Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
Supports Wake-on-LAN
Wireless Network (WLAN)M.2-2230 WLAN card with Realtek RTL8188EE Controller
Supports IEEE 802.11b/g/n
Max. 150Mbps up-/downstream (1T1R) at 2.4 GHz
One external antenna supplied
LEDs and ButtonsPower button
Power LED (blue)
HDD LED (yellow)
Front Panel Connectors2x USB 3.0
SD card reader
Audio line-out (headphones)
Microphone input
Back Panel ConnectorsHDMI 1.4b digital video and audio output
DisplayPort 1.2 digital video and audio output
D-Sub/ VGA analog video output (15-pin) - no hot plug
4x USB 2.0
Gigabit network (LAN, RJ45)
2x RS232 serial port, 9-pin D-Sub (support of an auxiliary voltage of 5 / /12 V,
the left port is switchable to RS422 / RS485) [6]
DC input for the external power adapter
4-pin connector (2.54 mm pitch) supports
- external power on button
- Clear CMOS function
- +5V DC voltage for external components
External WLAN antenna (perforation for second antenna available)
Other Onboard ConnectorsConnector SPK1 (4-pin) supports two 2 W speakers
Connectors COM1/COM2 for serial ports (occupied)
Connector CN9 for supplied CMOS battery (type CR2032)
Jumper JP2 for power-on-after-power-fail (hardware solution)
Power SupplyExternal 40 W AC/DC power adapter (fanless)
AC Input: 100 ~ 240 V AC, 50 ~ 60 Hz
DC Output: 19 V / 2.1 A
Automatic voltage adjust
Dimensions: 89.5 x 37 x 26.5 mm (LWH)
DC Input connectorDC Connector: 5.5 / 2.5 mm (outer/inner diameter)
The DC-input of the computer supports an external power source
with either 12 V ±5% or 19 V ±5%.
Supplied AccessoriesMulti-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)
VESA mount for 75 / 100 mm standard (two metal brackets)
Four thumbscrews M3 x 5 mm (screws together VESA mount and PC)
Four screws M4 x 10 mm (to affix VESA mount on the PC)
Four screws M3 x 4 mm (to mount a 2.5" storage into the bay)
Driver DVD (Windows 64-bit)
External 40 W power adapter with power cord
Optional Accessies:- PS02: optional stand for vertical operation
- CXP01: adapter cable for external power button
- PRM01: 2U rack-mount front plate for two Shuttle XPC slim PCs
- WWN01: adapter plus 2 antennas & cables supports one M.2 LTE module and one SIM card
24/7 Nonstop OperationThis device is approved for 24/7 permanent operation.
Requirements:
- Free air circulation around the PC must be guaranteed.
- Ventilation holes must be kept clear.
- Any installed disk must also be approved for permanent
operation by its manufacturer
Environmental SpecificationsOperating temperature range: 0 ~ 40 °C
Relative humidity range: 10 ~ 90 % (non-condensing)
Certification and ComplianceEMI: FCC, CE, BSMI, RCM, VCCI, RED
Safety: CB, BSMI, ETL
Other: RoHS, Energy Star, ErP
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP),
(4) 1999/5/EC related to Radio and Telecommunications Terminal Equipment (R&TTE)
Verybox utiliza cookies para recopilar información estadística y mejorar el uso de la Web. Si continúa navegando consideramos que acepta el uso de cookies. OK | Política de cookies