Shuttle Nano NC10U

Hoja de datos

Audio

Audio Realtek® ALC 662 High-Definition Audio Codec
3.5 mm / 4-pole combo audio connector for headphones and microphone
Digital multi-channel audio output: via HDMI and DisplayPort

Low power consumption

Power consumption in idle mode with 2.5" SSD under Windows 10: ca. 6 W only

Chassis

Barebone PC with a black plastic chassis
Dimensions: 142 x 142 x 42 mm (LWH) = 847 ml
Weight: 0.4 kg net, 1.2 kg gross
Hole for Kensington Lock
Includes vertical stand and 75 / 100 mm VESA mount

Operation Position

1) Horizontal
2) Vertical with stand
3) VESA-mounted behind an appropriate monitor

Operation System

This barebone system comes without operating system.
It is compatible with:
- Windows 10, 64-bit
- Linux, 64-bit

Processor

Model: Intel Celeron 4205U (ULV)
System-on-a-chip architecture (SoC) with integrated memory and graphics controller: no chipset required
FCBGA1528 package - directly soldered onto the mainboard
Code name: Whiskey Lake U (8th Generation Intel Core)
Cores / Threads: 2 / 2
Clock rate: 1.8 GHz
L1/L2/L3 Cache: 128 kB / 512 kB / 2048 kB
TDP wattage: 15 W maximum
Manufacturing process: 3rd-generation enhanced 14nm++
Maximum Tjunction Temperature: 100 °C
Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2

Integrated graphics

Intel UHD Graphics 610
GPU clock frequency: 300~900 MHz
Execution Units (EUs): 12
Supports DirectX 12
Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
Supports Quick Sync Video and Clear Video HD technology
Supports up to two independent screens:
1) DisplayPort 1.2 supports Ultra HD @ 60 Hz
2) HDMI 2.0a supports Ultra HD @ 60 Hz

Power Adapter

External 65 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
Output: 19 V DC, max. 3.42 A, max. 65 W
DC cable ca. 175 cm with coaxial connector: 5.5 / 2.5 mm (outer/inner diameter)
The DC-input of the computer supports 19V±5%.
AC cable, ca. 170 cm, with flat, two-pole Europlug

Memory support

2x SO-DIMM slot with 260 pins
Supports DDR4-2133 (PC4-17000) SDRAM at 1.2 V
Supports DDR4-2400/2666 at 2133 MHz
Supports Dual Channel mode
Supports a maximum of 32 GB per DIMM,
maximum total size: 64 GB
Supports two unbuffered DIMM modules (no ECC or registered)

Card Reader

Integrated SD card reader
Supports SD, SDHC and SDXC memory flash cards
Supports booting from SD card

Front Panel connectors

USB 3.2 Gen 1 Type A (max. 5 Gbps, blue)
USB 3.2 Gen 1 Type C (max. 5 Gbps)
SD card reader (supports SD, SDHC, SDXC)
Power button
Power LED (blue, flashing when in suspend mode)
HDD LED (orange)

Back Panel connectors

DisplayPort 1.2
HDMI 2.0a
2x USB 2.0 Type A
Gigabit LAN (RJ45)
Audio Combo Port for headphones and microphone (3.5 mm jack, 4-pole) [2]
DC-input connector for external power adapter
2x perforation for optional external WLAN antennas

Conformity/Certifications

EMI: CE, FCC, BSMI, RCM, RED, VCCI
Safety: CB, BSMI, ETL
Other: RoHS, Energy Star, ErP
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2014/30/EU relating to electromagnetic compatibility (EMC),
(2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP),
(4) 2014/53/EU Radio Equipment Directive (RED)

Optional Accessories

WLN-M: Wireless LAN module with two external antennas, 
supports WiFi IEEE 802.11n/ac (2.4 / 5 GHz) and Bluetooth 4.0

Environmental Spec

Operating temperature range: 0~40 °C
Relative humidity range: 10~90% (non-condensing)

Gigabit LAN

Ethernet Controller Intel i211
Supports 10 / 100 / 1.000 MBit/s operation (Gigabit)
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
IEEE 802.3az Energy Efficient Ethernet (EEE)
Interface: PCIe v2.1

Supplied Accessories

Multi-language Quick Installation Guide
Driver DVD for Windows 10
VESA mount set (two parts), made of steel,
Six screws (4x M4x10, 2x M2.5x3)
Bracket for a 2.5" drive with eight screws (M3x5)
Two aluminium stands (110 mm width) with four screws M3x7 for vertical operation
Four black, rounded rubber feet, ca. 10 mm diameter x 2.5 mm
Two screws for mounting of M.2 cards
Power adapter 65 W with AC power cord

Mainboard / BIOS

AMI BIOS in 8 MByte EEPROM with SPI interface
Supports resume after power failure
Supports Wake on LAN (WOL)
Supports Power on by RTC Alarm
Supports booting from USB devices and SD card reader
Supports hardware monitoring and watch dog function
Supports Unified Extensible Firmware Interface (UEFI)
Supports Firmware TPM v2.0 (fTPM)

Always-On Jumper

By removing Jumper JP1 (please refer to the Quick Installation Guide)
the system will start unconditionally once power is applied.

M.2 Slot for SSDs

The M.2 2280 BM slot provides the following interfaces:
- PCI-Express Gen. 2.0 X4 with up to 2 GB/s data transfer rate
- SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs with NVMe (with M key)

Cooling Fan

Built-in CPU cooling fan with 4-pin connector
Supports temperature-controlled RPM fan speed

2.5" Drive Bay

Supports one Serial ATA hard disk
or one SATA SSD drive in 6.35 cm / 2.5" format
Device height: 15 mm (max.)
Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth

Wireless LAN

Built-in M.2-2230-A/E WLAN card and internal antenna
Single-Chip 1T1R WLAN Controller Realtek RTL8188EE
Supports IEEE 802.11b/g/n, max. 150 Mbps up-/downstream
Security: WPA/WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x/i

Left Side connectors

Serial RS232 COM port (D-Sub, 9-pin)
Note: The serial connector (COM port) cannot be used if the NC10U is operated in vertical position.

Clear CMOS Jumper

Short Jumper JP2 for about 10 seconds to restore factory settings of BIOS.