XPC slim DL20N6
Fanless 1-litre PC suitable for 24/7 operation
The Shuttle XPC slim Barebone DL20N6 Series is the successor to Shuttle's DL10J. These fanless Slim PC barebones with an energy-efficient 10 nm Intel "Jasper Lake" processor are suitable for building particularly slim PC systems with drives and operating system as well as client/server setups for pure network-based applications. The optional Shuttle accessory WWN03 allows for an LTE module to be installed for mobile internet access. The integrated graphics is based on Intel's powerful 11th gen. Intel UHD Graphics that supports hardware acceleration for 4K videos. Combined with an SSD or M.2 drive, these Slim-PCs works virtually noiseless.

Intel® Pentium® Silver Processor N6005, Quad Core
Intel® UHD Graphics (11th Gen),
2x SO-DIMM DDR4-2933 hasta 16GB
HDMI 2.0b, DisplayPort 1.4a,VGA
4x USB 3.2, 2x USB 2.0, 2x COM (serial)
Intel Gigabit-LAN, WLAN 802.11n (1T1R)
External 40 W fanless

Lee masShow less
Detalles del producto

Hoja de datos

Fanless and silent
Completely fanless, virtually noiseless
Passive cooling through convective heat transfer
Perfect to be used in noise-sensitive environments
Fanless means less dust and thus virtually no maintenance required
24/7 nonstop operation
This device is approved for 24/7 permanent operation.
- Free air circulation around the PC must be guaranteed.
- Ventilation holes must be kept clear.
- Any installed disk must also be approved for permanent
operation by its manufacturer
Slim PC with black chassis made of steel
Dimensions: 190 x 165 x 43 mm (LWH) = 1.35-litre
Weight: 0.8 kg net and 1.95 kg gross
Two holes for Kensington Lock and numerous
threaded holes (M3) at both sides of the chassis
Operation Position
1) Horizontal
2) Vertical with mounted feet.
These feet can be purchased as optional accessory PS02.
3) Vertical (e.g. VESA-mounted behind an appropriate monitor)
In vertical position, the front USB ports should point upward.
Ventilation holes must not be blocked to ensure sufficient cooling.
Operation System
This system comes without operating system.
It is compatible with
- Windows 10 (64-bit)
- Windows 11 (64-bit)
- Linux (64-bit)
Intel® Pentium® Silver Processor N6005, Quad Core
CPU clock frequency: 2.0 GHz, max. Turbo frequency: 3.3 GHz
Code name: "Jasper Lake"
10 nm structure, FCBGA1338 package (soldered)
CPU cores / Threads: 4 / 4
L2 Cache: 4 MB
Thermal Design Power (TDP): 10 W
Supports x86-64, AES-NI, VT-x (EPT), VT-d, SSE4.2, AES
System-on-Chip processor (SoC) with integrated graphics processor, no chipset required
Integrated graphics
The Graphics Processing Unit (GPU) is integrated in the processor
Intel® UHD Graphics (11th Gen), GPU frequency: 450~750 MHz
Supports DirectX 12, OpenGL 4.5, OpenCL 1.2, Intel Quick Sync Video, Intel Clear Video (HD)
Execution Units (EU): 16
Triple Display Support via three video outputs:
- HDMI 2.0b: max. 4096 x 2160 @ 60 Hz
- DisplayPort 1.4a: max. 4096 x 2160 @ 60 Hz
- D-Sub/VGA: max. 1920 x 1200 resolution @ 60 Hz
Supports two digital displays and one analog display simultaneously.
The D-Sub/VGA connector does not support the Hot Plug feature.
Memory support
2x SO-DIMM slots with 260 pins
Supports DDR4-2933 (PC4-23466U) SDRAM at 1.2V
Supports Dual Channel mode
Supports max. 16 GB per DIMM
Maximum total size: 16 GB (either 1x 16 GB or 2x 8 GB)
Supports two unbuffered DIMM modules (no ECC)
Card Reader
Integrated card reader
supports standard SD, SDHC and SDXC memory flash cards
Controller: Genesys GL9750 SD Host Controller
Front Panel connectors
2x USB 3.2 Gen 2 Type A (red)
SD card reader
Audio line-out (headphones)
Microphone input
Back Panel connectors
HDMI 2.0b digital video and audio output
DisplayPort 1.4a digital video and audio output
D-Sub/ VGA analog video output (15-pin) - no hot plug
2x USB 3.2 Gen 1 Type A (blue)
2x USB 2.0 Type A
Gigabit network (LAN, RJ45)
2x RS232 serial port, 9-pin D-Sub (support of an auxiliary voltage of 5/12 V,
the left port is switchable to RS422 / RS485)
DC input for the external power adapter
4-pin connector (2.54 mm pitch) supports
- external power-on button
- Clear CMOS function
- +5V DC voltage for external components
2x perforation for optional Wireless LAN antennas
Other onboard connectors
Connectors COM1/COM2 for serial ports (occupied)
Jumper JP2 for power-on-after-power-fail (hardware solution)
USB 2.0 header (4-pin) required for WWN03 accessory
Environmental Specifications
Operating temperature range: 0 ~ 40 °C
Relative humidity range: 10 ~ 90 % (non-condensing)
Power Supply
External 40 W AC/DC power adapter (fanless)
AC Input: 100 ~ 240 V AC, 50 ~ 60 Hz
DC Output: 19 V / 2.1 A
Automatic AC voltage adjust
Dimensions: ca. 95 x 42 x 29 mm (LWH)
DC cable length: ca. 170 cm
AC cable length: ca. 170 cm (with 2-pin Europlug)
UEFI Firmware
16 MB Flash ROM with AMI's Aptio UEFI BIOS Firmware
Based on the Unified Extensible Firmware Interface (UEFI)
Supports Power-fail-resume / AC power-on state / always-on / always-off
Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
Supports boot up from external flash memory cards
With embedded Firmware TPM v2.0 (fTPM)
CMOS battery (type CR2032)
Integrated Audio
Realtek ALC897 / ALC662 / ALC888S Audio Codec
Two analog audio connectors (3.5 mm):
1) Line out (head-phones)
2) Microphone input
Digital multi-channel audio output: via HDMI and DisplayPort
Wired Network
RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/s.
Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
Supports Wake-on-LAN
LEDs and Buttons
Power button
Power LED (blue)
HDD LED (yellow)
Certification and Compliance
Safety: CB, BSMI, ETL
Other: RoHS, Energy Star, ErP
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)
Supplied Accessories
Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)
VESA mount for 75 / 100 mm standard (two metal brackets)
Four screws M3 x 5 mm (screws together VESA mount and PC)
Four screws M4 x 10 mm (to affix VESA mount on the PC)
Four screws M3 x 4 mm (to mount a 2.5" storage into the bay)
Two screws M3 x 5 mm (to mount some M.2 cards)
Driver DVD (Windows 64-bit)
External 40 W power adapter with power cord (Europlug)
DC Input connector
DC Connector: 5.5 / 2.5 mm (outer/inner diameter)
The DC-input of the computer supports an external power source
with either 12 V ±5% (max. 2.1 A) or 19 V ±5% (max. 3.33 A).
M.2 expansion slot for SSD card
M.2 2280 BM slot
Interfaces: PCI-Express Gen. 3.0 X2 and SATA v3.0 (max. 6 Gbit/s)
Supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280)
Supports SATA SSDs (BM-Key) or NVMe PCIe SSDs (M-Key)
Optional Accessories:
- PS02: optional stand for vertical operation
- CXP01: adapter cable for external power button
- PRM01: 2U rack-mount front plate for two Shuttle XPC slim PCs
- DIR01: DIN-Rail mounting kit
- WLN-M/-M1. WLAN module in M.2-2230 format with two external antennas supports WLAN and Bluetooth.
- WWN03: LTE kit with adapter card, 2 antennas and antenna cables. Supports one M.2 LTE module and one nano SIM card
M.2-2230E slot for WLAN cards
Interfaces: PCI-Express Gen. 2.0 X1 und USB 2.0
Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)
Supports WLAN expansion cards (optional Shuttle accessory: WLN-M / -M1)
2.5" Bay for Hard disk drive/SSD
Supports one drive in 6.35 cm / 2.5" format (hard disk or SSD)
Serial ATA III Interface with up to 600 MB/s transfer speed
Max. height 12.5 mm
Pre-installed SATA cable (data / power)
Supports Unified Extensible Firmware Interface (UEFI)
Hoja de datos de PEB-DL20N601 SHUTTLE XPC DL20N6
Descargar (1.73M)