XPC PSU Externo 120W
PE120
120W external power adapter
The Shuttle Accessory PE120 is an external power adapter which transforms the mains power to a lower 19V DC voltage. It is meant as a replacement device for certain Shuttle products. PE120 provides a maximum output wattage of 120W and can also be used for such devices, whose original power adapter had lower performance (e.g. 40W, 65W or 90W).
Model of the power adapter: AcBel ADC027
Input: 100~240 VAC (auto-adjust), 50~60 Hz, max. 1.8 A
Output: 19.0 VDC, max. 6.32 A, max. 120 W
Efficiency: 89% at 115/220 VAC max. load
Cooling: passive, fanless
DC cable length: ca. 180 cm, with two ferrite cores
DC connector: 5.5 / 2.5 mm (outer/inner diameter)
AC cable length: ca: 175 cm
AC plug for the wall socket: angled Schuko safety plug
(CEE-7/7 Type E+F with earthing contact)
AC plug for the power adapter: IEC 60320 C5 (3-pin)
Supports OVP, UVP, SCP, OTP, OCP
Environmental Spec:
Operation temperature range: 0 - 40 °C
Storage temperature range: -20 - 85 °C
Relative humidity range: 10~90% (non-condensing)
Dimensions: 150 x 65 x 36 mm (LWH), Weight ca. 600g
Compliance and Logos: CB, CE, UKCA, UL, TUV, BSMI, VCCI, CCC, RCM, PSE, KC
Data sheet
- Package contents
- Power adapter (120 W) with DC cable and DC output plug
AC power cord with angled Schuko-style safety plug
Quick guide
- Compliance and Logos
- CB, CE, UKCA, UL, TUV, BSMI, VCCI, CCC, RCM, PSE, KC
- Adapter model
- Model of the power adapter: AcBel ADC027
- Electrical features
- Input: 100~240 VAC (auto-adjust), 50~60 Hz, max. 1.8 A
Output: 19.0 VDC, max. 6.32 A, max. 120 W
Efficiency: 89% at 115/220 VAC max. load
Cooling: passive, fanless
DC cable length: ca. 180 cm, with two ferrite cores
DC connector: 5.5 / 2.5 mm (outer/inner diameter)
Supports OVP, UVP, SCP, OTP, OCP
- Environmental/physical spec
- Operation temperature range: 0 - 40 °C
Storage temperature range: -20 - 85 °C
Relative humidity range: 10~90% (non-condensing)
Dimensions: 150 x 65 x 36 mm (LWH)
Weight ca. 600g
- AC cable
- AC cable length: ca: 175 cm
AC plug for the wall socket: angled Schuko safety plug
(CEE-7/7 Type E+F with earthing contact)
AC plug for the power adapter: IEC 60320 C5 (3-pin)