PB Giada IBC-386
PB Giada IBC-386
RK3399 High-performance CPU
The ARM-based 3.5-inch motherboard is equipped with Dual-core Cortex-A72 & Quad-core Cortex-A53 processors. The onboard dual-channel LPDDR4 memory, eMMC5.1 storage and dual-band WiFi, Bluetooth 4.2 ensure its stable operating in harsh environments.
Supporting Dual Display Outputs
The board adopts Rockchip® integrated Mali-T860 GPU. It supports 1 x HDMI2.0 (Max. 3840 x 2160@60Hz) and 1 x LVDS (1920 x 1080@60Hz), 1 x eDP. It also has 1 x MIPI-CSI for Camera connection.
Fanless Design
With a passive thermal cooling system, the fanless design reduces the failure rate and makes the device running with noise-free and dustproof. It enables this Giada® device applicable in mission critical applications.
Data sheet
- Memory
- 2 GB, Onboard LPDDR4-2133 MHz (Optional: 4 GB)
- Storage
- 16 GB, Onboard eMMC (Optional: 32 GB/64 GB)
1 x TF Card reader
- Environment
- Operating Temperature 0°C ~ 60°C (32°F~140°F) @0.7m/s Air Flow
Humidity 95% @ 60°C (non-condensing)
- Dimensions
- 146 mm x 102 mm (5.75” x 4.02”)
- Processor
- Rockchip® RK3399 1.80 GHz
2 Cores Cortex-A72 & 4 Cores Cortex-A53
TDP 6 W
- Display
- Mali-T860MP4
OpenGL ES1.1/2.0/3.0/3.1, OpenCL,
Support AFBC (ARM Frame Buffer Compression)
4K VP9 decoders
4K 10bits H.265 video decoders
1080P VC-1, MPEG-1/2/4, VP8 video decoders
- Rear I/O
- 1 x USB3.2 Gen1 OTG, 1 x USB3.2 Gen1
1 x HDMI (Max.3840 x 2160 @60 Hz)
1 x 2-IN-1 Headset (AUDIO-OUT & MIC-IN)
1 x RJ45
1 x Power on, 1 x Recovery, 1 x Reset
- Power Requirement
- DC-IN, 12 V/2.08 A
- Operating system
- Android 7.1/Android 11
- Network
- 1 x Pef7071 PHY
Onboard Wi-Fi/BT module
1 x Full-size Mini-PCIe for 3G/4G
1 x SIM Slot
- System
- Auto Power On
RTC Set up independently every day, a week as a cycle
- Internal I/O
- 3 x USB2.0, signal by 3 x 4pin USB header,
2 x USB2.0, signal by 1 x 8pin USB header
1 x 20pin eDP
1 x 30pin dual channel 24bit LVDS (Max. 1920 x 1200@24 Hz)
1 x MIPI-CSI jack
3 x 4pin RS232 header, 1 x 4pin RS485 header
1 x 4pin TTL
1 x 6pin GPIO
1 x 2pin MIC-IN
1 x 4pin SPK (8W), 1 x 2pin SPK(16W)
1 x 6pin TP_I2C
1 x 6pin EX_BUTTON
1 x 6pin LVDS_BL, 1 x 6pin eDP_BL
Español