×

SMARTCASE™ S710 Chassis Kit Solution

Referencia:
S26361-F5
Marca:
Descripción

SMARTCASE™ S710 Chassis Kit Solution


The SMARTCASE™ S710 for industrial PCs in Mini-ITX format is based on the Kontron D3313-S motherboard for AMD's G series SoCs (System on Chip) and is particularly suitable for use in the extended temperature range thanks to a wide selection of active and passive coolers. The S710 can be used in horizontal and vertical mode.


HDD/system fan (4 pin PWM) includedSATAdata cable and power cableincludedChassis desk stand (horizontal/vertical, removable)includedChassis wallmountincludedChassis intrusion supportKensington lock supportMechanical lock for DC-in power connectorMounting option for 2.5” HDDMounting option for WLAN antennavia (RP-)SMA connectorMounting option for PCI/ PCIeriser (low profile)Mounting option for additionalserial port

Lee masShow less
Detalles del producto
S26361-F5

Hoja de datos

CHASSIS DATA
DIMENSIONS 250 x 52 x 191 mm (W x H x D)
COLOUR anthracite
WEIGHT ~ 1 kg
SUPPORTED MOTHERBOARDS
D3313-S1 GX-210 HA SOC – 2x 1.0 GHz/9 W Dual Core
D3313-S4 GX-222 GC SOC – 2.20 GHz/10-15 W Dual Core
D3313-S6 GX-424 CC SOC – 2.40 GHz/25 W Quad Core
ENVIRONMENTAL CONDITIONS
D3313-S1 (fanless): 0 °C – 35 °C*
D3313-S1/S4 (heatsink with heatpipe, fanless): 0 °C – 35 °C*
D3313-S1/S4/S6 (CPU fan + HDD fan): 0 °C – 50 °C*
5 % - 85 % relative humidity (non-condensing)
PACKAGE CONTENT
Chassis bottom/top incl. front bezel; I/O with integrated EMI gasket
HDD carrier incl. 4 pin PWM fan
Riser card holder incl. power button / power LED and intrusion switch
HDD SATA cable and power cable for one drive
Wall mount metal brackets
Motherboard mounting Screws
Chassis desk stand (horizontal/vertical, removable)
CHASSIS FEATURES
Kensington lock support
Mechanical lock for DC-In connector
Intrusion Support
2.5” Drive
WLAN antenna via (RP-)SMA connector
PCIe riser (low profile)
Additional serial port
APPROVALS & CERTIFICATIONS
CE
HDD FAN SPECIFICATION
MTBF 70.000 hours @ 40 °C
OPERATING TEMPERATURE
70.000 hours @ 40 °C
10 °C – 70 °C
PWM (4 pin), 40 x 40 x 10mm
1750 – 5.500 rpm (nominal)
Two ball bearing
Note: HDD fan not required for D3313-S1 with passive heatsink
(TAmbient ? +35 °C)
Adjuntos
SMARTCASEâ„¢ S710 Chassis Kit So
Hoja de datos de F5000-J2 SMARTCASEâ„¢ S710 Chassis Kit Solution
Descargar (563.29k)

Menú

Ajustes